-
|
 |
塑料化工管道用泵类产品
产品介绍：
美国汤普森FTI磁力离心泵，插桶泵：
FTI Mag Drive Advantage
• No mechanical seal.
• Extremely reliable.
• Superior design.
• Best chemical resistance.
• Low cost of ownership.
• Large selection
• Standard motors.
• KC & MSKC Series - Horizontal, polypropylene or PVDF construction.
• DB Series - Horizontal, polypropylene or PVDF construction.
• UC Series - Horizontal, ETFE-lined ductile iron, ANSI dimensional.
• SP Series - Horizontal, self-priming, polypropylene or PVDF construction.
• VKC & MSVKC Series - Vertical, polypropylene or PVDF construction.
All FTI Mag Drive Pumps Share These Features:
• Sealless pump technology, leak-proof, low maintenance, no seals to replace ever.
• Powerful neodymium rare earth magnetic coupling.
• Inner magnets completely encapsulated in corrosion-resistant materials.
• Specific gravity to 1.8*
• Superior run-dry ability when equipped with a carbon bushing.**
• TEFC motors standard ***, many other motor types available.
• FKM O-ring standard, EPDM and others available.
• Carbon bushing standard (except UC Series which has silicon carbide standard), PTFE
and ceramic available.
美国MASTERFLEX软管泵/蠕动泵：
Masterflex® I/P® Process Pump System
• Washdown epoxy coated enclosure provides protection in harsh
environments.
• ±0.25% accuracy over a 50 to 1 flow range.
• Easy-to-use controls, digital display.
• Choice of pumpheads to meet your requirements.
• Dual voltage brushless motor.
• Remote control of flow, start/stop and forward/reverse.
• UL, cUL, and CE approved.
• IP55 washdown rated enclosure.
• Remote Input: 4-20mA, 0-10vDC, 0n/0ff, direction.
Masterflex® I/P®Stainless Steel Digital Process Pump System
• 316 stainless steel housing and keypad are completely sealed for protection from
dust, water, and chemical cleaners.
• Reversible 3/8-hp brushless motor is maintenance free and rated for continuous
duty. Run pump in either direction; purge tubing before or after pumping.
• Remote control capabilities via water-resistant connector.
• Six-character digital display of four different parameters: Flow rate: 0.1 to 26 LPM;
Dispense volume: 10 mL to 26,520 mL (in 1 mL increments); Copy: 1 to 999,999
repetitions; Motor rpm: 1 to 650 rpm with 1 rpm resolution.
• User-selectable English or Metric units. Select milliliters, liters, or gallons for
dispense volume; display flow rate in either L/min or gal/min.
• Dispense by: L - volume in liters (or gallons); Copy - 1 to 999,999 dispense copies; or
SEC - time of each dispense: 1 to 999,999 seconds.
• Dispense interval mode: Set time interval (SEC) between dispense cycles from 1 to
99,999 seconds.
• Remote Input: Scalable 0 to 20mA; 4 to 20mA; 0 to 10V; start/stop; DIR (CW/CCW);
prime.
• Remote Output: Scalable 0 to 20mA; 4 to 20mA: 0 to 10V or TTL pulse,
“drive-running” contact.
PERISTALTIC PUMPS
Model Number Description RPM Remote
Control
Power
(Volt / Ph / Hz)
Masterflex ®I/P ®Peristaltic Pu
ALL-FLOW & GRACO 气动隔膜泵
GE, FILTER PUMP INDUSTRIES 系列离心泵：
PULSAFEEDER系列微小流量电磁计量泵
TUTHILL磁耦合齿轮泵
美国B+W A3系列蠕动泵及CHEM-PRO系列隔膜计量泵
请咨询我们了解更多泵类产品信息。
|
英文版
